DC MOTOR PUMP GROUP one
Standard Description
Consisting of the heavy duty DC motor plus the CB1S gear pump, this pump motor group is surely an ideal hydraulic electrical power unit for mobile hydraulic equipments, this kind of as car or truck carriers, mobile aerial lifts, and backup systems.
DC MOTOR PUMP GROUP two
Common Description
This motor pump consists of four.5″ DC motor, a CBSR gear pump with built-in relief valve and check out valve.
DC MOTOR PUMP GROUP 3
Standard Description
This motor pump includes a 4.5″ DC motor along with a CBSR gear pump which has a normal energy up/gravity down circuit by using a relief valve, a check valve as well as a solenoid release valve.
Specific Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean the many hydraulic parts concerned in advance of mounting the electrical power unit.
three. Viscosity of the hydraulic oil shoud be 15~68 cst, which should also be clean and free of charge of impurities. N46 hydraulic oil is suggested.
4. The energy unit needs to be mounted horizontally.
five. The relief valve strain is preset about 25% increased than the operating stress.
6. Flow handle valve for lowing speed adjustment is accessible unpon request.