1.A connecting link of an O-ring Chain for general application is pre-coated with grease in the pins. In advance of connection, confirm the grease around the surfaces of pins, and in case the amount of grease is small, apply grease with bare hands. (If gloves are employed, the grease will probably be absorbed by the gloves.)
Example: Once the connecting link (I) of an O-ring chain for basic application is
shipped, O-rings are fitted on the roots in the pins. If the O-rings come loose on account of vibration throughout transport, refit the O-rings in to the roots in the pins.
In this instance, make sure to return the grease collected in the roots of the pins to the central surfaces on the pins, additional at portion A than at portions B proven while in the over illustration. (Portions A is worn as a result of sliding together with the bushings.)
2.The chain might be most effortlessly connected on the teeth of a sprocket. Engage the hyperlinks at the two ends on the chain together with the sprocket teeth and match connecting pins. If your sprocket can be moved, the chain can also be connected to the loosened side.
three. Connecting method
1.Confirm that O-rings are connected to your roots on the pins.
two.If the amount of grease applied about the connecting pins is modest, coat the pins with grease on the central portions.
three.Insert the connecting pins in to the bushings from the inner links at both ends.
four.Confirm that the grease is applied for the complete face of your O-ring, and fit the O-ring onto the connecting pins.
5.Insert the connecting pins to the connecting plate and even though pressing the connecting plate, install the spring clip. Verify no matter whether the head (the end with no split) of your spring clip is turned while in the feeding route in the chain. (See the following illustration.)
six.Be sure to confirm the spring clip is securely fitted within the clip grooves on the connecting pins.
This completes jointing from the connecting hyperlink. Note that grease over the surfaces of connecting pins and O-rings might be eliminated in the course of set up get the job done. In this case, re-grease employing the grease on the surface from the base chain or the grease within the polyethylene bag by which the connecting website link was contained.