This energy unit characteristics a long lasting magnet motor which has a energy up gravity down circuit. Activate the commence solenoid to begin the motor to lift the machine. The lowing motion is activated from the solenoid valve with the reducing velocity controlled from the stress compensated flow management valve. Products of this series can be widely used in the field of logistic products this kind of as fork lift, mini lift table, and so on.
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean the many hydraulic elements concerned ahead of set up of the power unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which must also be clean and no cost of impurities. N46 hydraulic oil is recommended.
4. This energy unit is built to be mounted vertically.
5. Check the oil degree while in the tank following the primary star on the power unit.
six. Oil changing is needed just after the preliminary a hundred operation hours,afterwards once each 3000 hours.
seven. More pump sizes and tank sizes are avaiable upon request.