We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086-13 0571 88828
INTRODUCTION
Aside from the trencher chain, we also offer similar roller chains to suit the application demands of many EPT types of engineering machinery.
This series of transmission chain for trenchers is mainly used in dirty environment, and has high requirement on its performance in withstanding impact load. For optimized performance, we design this product based on simulated working environment. Also, we give special attentions to the design of each chain component so as to meet application demands perfectly. The design detai EPT are given below.
1. The product is designed with increased gap between the bushing and the pin, as well as the gap between the roller and the bushing. Thus, the flexible turning and rotation movements are ensured.
2. Due to the optimized clearance between the sidebar and the pin, as well as the clearance between the sidebar and the bushing, the connection firmness between the sidebars and the pin/bushing is largely enhanced.
3. The bushing with increased carburized depth helps extend the service life of the trencher chain.
4. Some wearing parts are hard chromium plated to avoid too quick surface abrasion.
| hain no. | Pitch P(mm) | Width of inner link b1(mm) | Sidebar | Pin | Diameter of roller d1(mm) | Tensile strength Q(min)(KN) | Weight per meter q kg/m | |||||||||
| T mm | h mm | H1 mm | H mm | E mm | E1 mm | E2 mm | E3 mm | d4 mm | d2 mm | L mm | ||||||
| 2250GL-M3 | 42.01 | 25.2 | 4.9 | 31.8 | 33.3 | 60.3 | 69.8 | 41.3 | 2.9 | 25.4 | 9.95 | 11.1 | 56.3 | 22.23 | 120 | 7.78 |
| Chain no. | Pitch P(mm) | Width of inner link b1(mm) | Sidebar | Pin | Diameter of roller d1(mm) | Tensile strength Q(min)(KN) | Weight per meter q kg/m | ||||
| T mm | h mm | H mm | d1 mm | L1 mm | L2 mm | ||||||
| 2250GL-M | 42.01 | 25.2 | 4.9 | 31.8 | 38.1 | 11.1 | 26.9 | 29.4 | 22.23 | 120 | 6.57 |
| 2250GL-M2 | 42.01 | 25.5 | 6.4 | 31.8 | 60.3 | 11.1 | 26.9 | 33.9 | 22.23 | 120 | 6.47 |
For more than 20 years, we have focused on custom chains.
For more than 20 years, We have done hundreds of different kinds of industrial chains.
So we have a wealth of custom chain experience.
Here are some of the varieties of the chains.
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
