Cyclo Drive Reducer

Cycloidal pinwheel reducer is certainly a up-dated of new type transmissing machine made with K-H-V less pearly whites engagement and the cycloidal pin steering wheel clenching device, which are trusted in drive and lowering of textile and dying, foodstuff, mining and metallurgy, Oil and chemical conveyors, project machinery etc, cranes and Industry. various fields.
Features:

1. Equipment is made from high durability low carbon alloy metal by carburizing and quenching. The hardness of tooth surface can reach HRC58-62. CNC grinding technology is followed for all gears, with great precision and good contact performance
2. high transmission proficiency: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable procedure and low noise;
4, compact structure, light weight, long service life and high bearing potential;
5. convenient to check, assemble and disassemble.

Operation specifications and precautions
1.High modularization design: various equip with various motor or other power insight conveniently.Same machine type may equip with different power motor. It is easy to recognize the combination and
junction between every machine type.
2.Transmission ratio: great division, wide scope. The combined equipment type may form very large transmitting ratio, i.e. productivity suprisingly low rotary speed.
3.Form of installation: the position to be installed is not limited.
4.High strength, compact: the box body is made of substantial strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and great grinding process, which means bearing potential of unitvolume is substantial.
5.Long life: Under the condition of appropriate type chosen (including choosing suitable operation parameters)normal procedure and maintenance, the life of main elements of speed reducer (except wearing parts) should not be significantly less than 20000 hours. The using parts include lubricating bearing, oil seal and essential oil.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High speed ratio and efficiency
Single stage transmission can reach to 1 1:87 of speed-downward ratio and the efficiency is a lot more than 90%. If make use of multi-speed drive the speed-down ratio is bigger.
2. Compact
Being adapted epicyclic tranny principle, the input and output shaft are at same axis middle, it is compact.
3. Smooth and stable run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is bound anyway content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be acquired.The structure is easy, but it can realize high reduction ratio product.
2. Small gear clearance
The Drive, which meshes with ordinary gears and has minimal backlash, is vital to the controller business.
3. High precision
Multiple teeth are involved simultaneously, and there are two gears engaged with 180 degree symmetry. Consequently, the influence of tooth pitch error and cumulative tooth pitch error on the rotation accuracy is relatively average, which makes the positioning precision and rotation accuracy reach an extremely high level.
4. Less parts, convenient installation
The three basic components achieve a high deceleration ratio, plus they are all on a single axis, therefore the kit is easy to install and simple to shape.
5. Small in proportions and light in weight
Compared with the prior gear device, the volume is 1/3, the pounds is 1/2, but can obtain the same torque potential and reduction ratio, reaching small lightweight.
6 High torque capacity
Flexible wheel material USES particular steel with substantial fatigue strength.Different from ordinary transmission unit, the number of teeth meshing accounts for on the subject of 30% of the full total number of teeth. Moreover, it is in get in touch with with the surface, to ensure that the pressure borne by each equipment is reduced and substantial torque potential can be obtained.
7 High efficiency
The sliding of gear meshing parts is very small, which reduces the energy loss due to friction. Therefore, high reduction ratio can be achieved while maintaining high productivity, and miniaturization of driving motor can be realized.
8. Low noise
The apparatus meshing cycle quickness is low, the transmission motion force balance, which means operation is quiet, and the vibration is very small.
◆Excessive speed ratio and huge efficiency single-stage transmission can perform a deceleration ratio of 1 1:87, and the efficiency is more than 90%. If multi-stage transmission is used, the deceleration ratio will become larger.
◆Because planetary transmission principle is adopted, the type shaft and result shaft are on a single axis line, to ensure that the machine style can get the tiniest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is larger, and the mechanism of balancing machine parts will make the vibration and voice limited to a minimum.
◆Reliable use and prolonged service life for the reason that main parts are made from excessive carbon chromium steel, high strength is normally obtained by quenching (HRC58-62), and rolling friction is employed in some transmission contacts, so the service life is prolonged.
Cycloid reducer is going to be a cycloid needle teeth meshing planetary transmission principle drive models, is a great transmission has various advantages, versatile, and can be both positive and negative operation.

•Big ratio, and high efficiency Smooth operation,

• low noise The usage of reliable,

• extended life can reach 50000 hours

• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically very little wear, durable.

• Compact structure,

• small size Because the utilization of a planetary transmitting, the input shaft and the end result shaft on the same axis, making the model to get the smallest possible size.

• Reasonable design, easy protection, and breakdown easily install,

• the least number of parts along with simple lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt essential double wall world pinion precision, increase the output strength and carrier.

(2).Hoop clamp coupling have five connection techniques ideal for different application environments.

(3).Size over PL/PF120(incorporating)precision and high strength integral inner gear housing, processed in a single station,which eliminate the cumulative mistake and assembling error of split type.Eliminate casting process;adopt hot of forging process, that may decrease the blank material defects.

(4).The meshing equipment adopt shaving process after carburizing and quenching,which much easier to make gear surface smooth and high accuracy,reduce the temperature rising caused by gear surface gluing and friction.
This series worm-gear reducer was engineered after RV worm microreducer, that have a complete norm, wide speed for selection, and several mounting positions. Its performance and mounting dime nsions conform the same kinds of foreign.
The mixture of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, compact structure, beautiful shape, radiate heat efficiently and low noise.
Great sealing and adaptability.Its combo with T equipment reducer and MB/MBN variator can meet all types of speed requirement.

Tags:

Recent Posts