Disc coupling

Our disc packs are produced working with substantial grade stainless steel
(AISI-301), ensuring large power, large endurance to fatigue, and resistance to most environmental circumstances.
Disc couplings employ unitized disc packs with both 6 or eight bolt patterns. The eight bolt design and style can transmit higher torque than the six bolt layout, on the other hand, it is not ready to accommodate as significantly angular misalignment.
Couplings is often fitted with overload bushings to protect the disc pack during momentary torsional overloads.
Couplings are offered inside a selection of configurations to match most applications. Additionally, ?¡¥s engineering department can customize a coupling to meet numerous exclusive demands such as close coupled, drop-out centers, electrically insulated, vertical mounting, and security couplings. A notable style provided by may be the decreased minute (DI Type) coupling that meets the anti-flail device requirements mandated in API-610 while supplying a lower fat and brief center of gravity to bearing distance.
The layout and manufacture of disc couplings is integrated right into a licensed Quality System in accordance to ISO-9001 to fulfill the higher excellent demands of clients.
Pros of your Disc Coupling
Eliminates the want for lubrication and coupling servicing
Coupling can be inspected with out disassembly
Condition of disc packs may be inspected which has a strobe light while the machine is operating
Note: It truly is not recommended that couplings be operated with out coupling guards.
Easy to assess tools misalignment
Torsionally rigid without any backlash
No wearing parts
\Resistance to harsh environments
Long existence when thoroughly sized and aligned
High energy density (increased torque for a provided outside diameter)
Supports the API-610 Standard up to 3,800 RPM
Unitized disc packs make certain repeatability required for meeting the balance and piloting demands as mandated by API-610
Out there with Overload Bushings to protect the coupling from momentary torque overloads
Prevents the disc pack from getting plastically deformed
Allows for shorter BSE (shaft separation) since bolts might be turned to face inward
Special orientation of bolts will allow the bolts for being tightened utilizing a torque wrench instead of nuts (Regular is usually to tighten nuts with torque wrench)


Recent Posts