Good sales China in Bekasi Indonesia Quality Medium and High Voltage Wound Rotor Slip Ring AC Motor with top quality

Good  sales  China  in Bekasi Indonesia  Quality Medium and High Voltage Wound Rotor Slip Ring AC Motor with top quality

We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778083988828

The power level, installation dimensions and electrical performance of the 6KV/10KV high-voltage slip ring three-phase asynchronous motor are in compliance with relevant IEC standards. The basic installation method of the motor is the horizontal bottom angle (IMB3), the wor ept system is the continuous wor ept system (S1), and the wound rotor is made of Class F insulation material.
The bearing of 6KV high-voltage wound rotor slip ring motor has two types of rolling bearing and sliding bearing, depending on the motor power and speed. If the motor has a high degree of protection, the protection level of the bearing will also increase. The rated frequency of the motor’s power supply is 50Hz, the rated voltage is 6000V/10000V, and the basic type of protection is IP54. The motor slip ring housing can be protected to IP22 or IP23. Other voltage, frequency and degree of protection motors are also available upon request.
6KV/10KV high voltage winding rotor slip ring motor main outlet box is IP54 protection grade, generally installed on the right side of the motor (facing the motor shaft extension end), can also be installed on the left side of the motor according to the order requirements. Inside the main outlet box, outside There are separate ground terminals.
6KV/10KV high-voltage winding slip ring motor increases the setting and bearing temperature measuring device. It can also add heating device inside the motor. The shaft extension key of the motor generally adopts the tangential key, and the motor carbon brush is not lifting structure.
6KV/10KV high-voltage wound rotor slip ring motor can be used to drive a variety of different machinery, such as compressors, pumps, crushers, cutting machine tools, transportation machinery and other mechanical equipment, in mining, machinery industry, petrochemical industry, power plants, etc. Used as prime mover in various industrial and mining enterprises. The motor used to drive the blower, coal mill, rolling mill and winch should indicate the purpose and technical requirements when ordering, and adopt special design to ensure reliable operation.

Center height range: H355 ~ 1000mm
Power range: 220kW ~ 10000kW
Number of poles: 2/4/6/8/10/12
Rated voltage: 6000V/6600V
Rated frequency: 50HZ/60HZ
Protection level: IP54 or IP55
Insulation class: F
Work system: S1 (continuous)
Cooling method: IC611/IC616
Installation form: IMB3
Motor connection: Y (three outlet terminals in the junction box, the junction box from the extension of the spindle is located on the right side of the base)
Altitude: no more than 1000m
This type of motor is suitable for use in environments where the ambient air temperature does not exceed 40 ° C and there is no serious dust, the minimum ambient air temperature is -15 ° C, and there is no corrosive and explosive gas in the air (which can also be made into a damp heat or high-altitude motor).

The 6KV /10KV high-voltage wound rotor slip ring motor can increase the large starting torque at a small starting current. The motor is suitable for applications where the capacity of the feeder line is insufficient to start the squirrel-cage rotor, the starting time is long, the starting is frequent, and the small-range speed regulation is required. This series of motors has the advantages of high efficiency, energy saving, low noise, low vibration, light weight, reliable performance, convenient installation and maintenance.

The company has large-scale laboratory, intelligent CNC winding machine, CNC rising machine, automatic wrapping machine, VPI high pressure vacuum immersion system, large-scale dipping paint drying furnace, 60 tons test platform, large vertical car, milling machine, grinding machine, Each type of dynamic balancing machine, double-feedback test and detection system with 6MW (12MW) motor and other motor production professional equipment more than 500 sets, sound mechanical equipment processing capacity, to lay a good foundation for customers to improve good quality motor products.

1. The outer packaging of the products are all standard export-oriented wooden plywood packaging.
2, the product packaging is protected by moisture, water plastic soft packaging
3. For products with special transportation requirements (such as temperature, fragile, variability, and easy to get wet), the packaging protection measures will be strengthened, and the ept mark will be printed on the package.
4. There are obvious signs and symbols on the pac ept box that must be paid attention to during transportation and storage (such as position, moisture, rain, shockproof, lifting position, etc.).

Our company’s motor manufacturing factory adheres to the concept of green, efficient and energy-saving production service, pays attention to the harmonious development of internal and external environment, builds environmentally friendly motor manufacturing enterprises, strictly implements motor standard process, and selects high-quality energy-saving materials to ensure the quality of motor products.

 

The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.

Good  sales  China  in Bekasi Indonesia  Quality Medium and High Voltage Wound Rotor Slip Ring AC Motor with top quality

Good  sales  China  in Bekasi Indonesia  Quality Medium and High Voltage Wound Rotor Slip Ring AC Motor with top quality

Tags:

Recent Posts