HK style roller chains

Downsizing Your Program with Increased Power Chains
HK type roller chains conform to H type of ANSI, and their thickness of inner and outer link plates are equal to individuals of your subsequent larger size chain. Thus, HK variety roller chains are higher in tensile strength by about 20%and in greatest allowable load by about 15% than those of normal roller chains. Because the excess weight of your chains is also larger, HK type roller chains are suitable to the application of hefty duty at very low pace.
Encouraged makes use of
?Optimal for places where increased strength is needed but massive and heavier chains can’t be made use of.
Variety of chains
Choose a good HK type roller chain according to “Low-speed selection”
For the greatest allowable load, see the following table of dimensions.
HK variety roller chains can be found up to triplex.
Sprockets
Use regular sprockets to get a simplex HK roller chain Since the transverse pitches are bigger than those of common chains during the case of duplex or triplex, conventional sprockets cannot be made use of. Refer towards the sprocket tooth profiles for HK
Connecting link and offset hyperlink
The tensile strength of connecting hyperlinks and offset hyperlinks are listed within the left, however the greatest allowable load is lower than that in the base chain. Please seek advice from us need to you have any issues. It truly is advisable to use the connecting link of interference-fitted (FJ, HJ)
Never ever make the holes with the connecting plate greater and by no means make the pins thinner to facilitate the work for fitting the pins into the connecting plate, since otherwise the fatigue strength are going to be lowered.
Selection of chains
Select a suitable HK type roller chain based on “Low-speed selection”
For your maximum allowable load, see the following table of dimensions.
HK type roller chains are available up to triplex.
Sprockets
Use common sprockets to get a simplex HK roller chain Since the transverse pitches are larger than these of regular chains in the case of duplex or triplex, common sprockets can’t be utilized. Refer to your sprocket tooth profiles for HK
Connecting website link and offset hyperlink
The tensile power of connecting back links and offset hyperlinks are listed to the left, but the greatest allowable load is lower than that in the base chain. Please seek the advice of us should you have any queries. It really is encouraged to utilize the connecting website link of interference-fitted (FJ, HJ)
Under no circumstances make the holes with the connecting plate more substantial and by no means make the pins thinner to facilitate the function for fitting the pins to the connecting plate, due to the fact otherwise the fatigue power will likely be lowered.