Mixture CHAIN

Mixture Chain is used extensively from the cement, paper and pulp, quarrying, and mining industries for elevating and conveying a broad selection of abrasive and non-abrasive elements. Additionally it is ?nding many uses on the whole in-dustrial assembly conveyors. It is not advised for drive chain.
The building of Combination Chain may be either cottered or riveted. Cottered is ordinarily consid-ered normal. Pins have ?at parts at their ends, which lock in to the appropriately punched sidebars, avoiding pin ro-tation throughout chain operation. All pin holes are clean-cored for smooth bearing surfaces and therefore are dimensioned for good pin clearance. Field dimensional standards are rigidly maintained and this chain may very well be interchanged with hyperlinks of other manufacturers.
Pitch sizes range from 1.631 to 6.050 inches; tensile strength array extends from 12,150 to 67,500 pounds. All Combination block hyperlinks except C55 and C55L have elliptical barrels. This adds more metal wherever the sprocket to chain get in touch with leads to most chain wear.
MBP 132C has chambered barrels containing grease which lubricates pins, helps to prevent joint freezing, and pro-hibits entry of corrosive and abrasive materials in to the bar-rel core.
Attachments are available in lots of of the pitch sizes for any wide variety of applications.
Blend links are symmetrical and could hence be operated in both direction of travel.
Brutaloy and cast steel sprockets can be found for each pitch dimension.
COUPLER Hyperlinks FOR Blend CHAIN
Coupler backlinks are necessary for joining chain where no take-up is obtainable. Every chain pitch size includes a Promal cast off-set sidebar coupler link obtainable for this purpose.


Recent Posts