O-Ring Chain (LD)/X-Ring Chain (LX)

Highest wear resistance available by sealing grease in between pins and bushings
The sturdiness of chain is dramatically enhanced because grease is sealed among the pins and bushings by O-rings. The O-ring chain may be the most dependable model with the Ultimate Daily life Chain Series with its exceptional wear resistance even within the ailments or environments exactly where chain maintenance is hard.
Encouraged uses.
?Situations exactly where regular chain replacement is needed as a consequence of put on stretch
?Circumstances exactly where lubrication during the service is unattainable
?In an atmosphere with significantly soil, sand, dust, etc.
?Applications that demand power higher than that of a sintered bushing roller chain
Other options
?Minimizing noise. (The noise degree is three dB reduce in contrast to conventional roller chains.)
?Minimizing vibration together with the friction produced by O-Ring. (The power reduction as a result of friction is almost negligible, because the frictional force concerning the pins and bushings is for usually during the applications.)
Collection of chains
The power of an O-ring chain is nearly precisely the same as that of the regular roller chain. (Since the pins are longer than these of standard roller chain, the average rupture strength is somewhat reduced.)
For deciding on an appropriate chain, refer to “Selection of Chains” .
When the services ambient temperature is higher than 80° C, distinctive heat resistant O-rings have to be utilised. In this case, make contact with us for far more information and facts.
Connecting back links and offset backlinks
Two forms of connecting hyperlinks are available: clearance match and interference match. When high power or durability is needed, use interference-fit connecting link. Only 2POJ is accessible as the offset hyperlink for all sizes.
Sprockets
O-ring chain makes use of longer pins than a common roller chain. When applying multiplex O-ring chain, the common sprocket for multiplex chains cannot be applied.
Caution
O-ring chain is not really recommended in applications where solvents or other substances might assault “Nitric Rubber”. Distinctive material O-rings are also accessible for these ailments: Please seek advice from us for details. In general, “Nitric Rubber” is broken by get hold of using the following chemical components.