General Description
Consisting of a pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this electrical power unit is built to operate materials dealing with products. The decreasing movement is achived by the solenoid valve with the lowering pace managed by an adjustable needle valve. The left and suitable functions are equipped with a dual pilot operated check valve and cross-over relief valves.
Remark: Please seek advice from our sales engineer for the distinct pump displacement, motor power or tank capability.
Unique Notes
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean every one of the hydraulic components concerned just before installation of the energy unit.
three. Viscosity in the hydraulic oil shoud be 15~46 cst, which should really also be clean and totally free of impurities.N46 hydraulic oil is recommended.
4. This power unit must be mounted horizontal.
5. Check the oil level while in the tank right after the primary start from the energy unit.
6. Oil shifting is required after the first one hundred operation hours, afterwards as soon as every single 3000 hrs.


Recent Posts