Shaanxi stainless steel clamp housing coupling

The stainless steel shell coupling is mainly used in liquids. Because 304 itself has the function of rust prevention, this type of coupling is often used in mixing equipment.Because the shell coupling is installed vertically, and the mixing wheel is vertical, the main reason is that the vertical force of the mixing wheel will be very uniform.Therefore, only two kinds of couplings, such as a shell coupling or a flange coupling, can be used for the normal use of the mixing wheel.

The characteristics of the stainless steel shell coupling are similar to those of the shell coupling, simple structure, easy to assemble and disassemble, suitable for low speed (circumferential speed of 5M/S), no impact, stable vibration load, suitable for stirring The connection of the vertical shaft such as the instrument.All models under the supporting bracket of the worm gear reducer are equipped with a clamp coupling as standard. Due to the simple structure, low cost, and large torque transmission, when the speed is low, there is no impact, the shaft has high rigidity and good centering. Often used.

The concentricity required by the stainless steel jacketed coupling is very strict and cannot be compensated for the axial direction.This is inferior to the gear coupling. When the two shafts are slightly out of concentricity, the displacement can be compensated, and the coupling can be used normally.There are two types of stainless steel jacket couplings: 301-good ductility, used for molded products.It can also be hardened by machining.Good weldability.Abrasion resistance and fatigue strength are better than 304 stainless steel.Model 302-same as 304, because of its relatively high carbon content, it has good strength.

The working principle of the stainless steel clamp housing coupling is: the friction between the two clamp housings and the shaft surface through the pre-tightening force generated by the tightened bolts transmits the torque, usually by adding a single key to each of the two shaft ends. The effect of increasing the transmitted torque.This coupling is suitable for situations where there is no relative displacement, including connecting the drive shaft and the motor to the gearbox.Stainless steel shell couplings are increasingly widely used in motion control systems as appropriate linear connection parts.

Main dimensions of stainless steel clamp housing coupling: