Henan FCL type elastic sleeve pin coupling

FCL typeElastic sleeve pin couplingIt has the performance of compensating the relative deviation of the two shafts, which is suitable for medium and high power transmission, and is not suitable for working parts that require vibration reduction and strict noise control.The elastic sleeve pin coupling is a pin made of several non-metallic materials, which is placed in the mating hole between the two halves of the coupling and the inner surface of the outer ring, and the two halves of the coupling are realized by transmitting torque through the pins.器连接。 Connectors.

Reasons for less allowable compensation

FCL type elastic sleeve pin coupling axis displacement allowable compensation is less, the reasons are as follows: XNUMX. FCL type elastic sleeve pin coupling relies on the locking force of the pin group to generate the friction moment on the contact surface, And compress the rubber elastic sleeve to transmit torque.It is suitable for small and medium-power shafting transmissions with good rigidity of the installation base, high centering accuracy, low impact load, and low vibration reduction requirements.

The work of the elastic sleeve is compressed and deformed. Because the thickness of the elastic sleeve is thin, the volume is small, and the elastic deformation is limited, the elastic sleeve pin coupling can compensate the axis displacement and elasticity, but the allowable compensation amount for the axis displacement is less. The elasticity is weak.

FCL type elastic sleeve pin coupling has a relatively simple structure, easy to manufacture, no lubrication, no need to bond with metal vulcanization, easy to replace the elastic sleeve, no need to move the half coupling, with compensation for the relative deviation of the two shafts and damping buffer performance.

technical parameter: