Shaanxi LX type elastic pin coupling

The LX elastic pin coupling is suitable for various coaxial transmission systems. It uses the cross-sectional shear strength of the nylon rod to transmit torque. The transmission torque is 160-160000N.m, and the working temperature is -20~80℃. The structure is simple, the maintenance is convenient, and it has cushioning and shock absorption performance and the ability of axial offset compensation.

The pin in the LX elastic pin coupling is in shearing and squeezing state when working, and its strength condition is to calculate the shear strength of the cross section of the elastic pin and the squeeze strength of the pin and the wall of the column hole.

The HL type-elastic pin coupling has been listed as standard GB5014-85, which is suitable for a variety of mechanical transmission shafts that connect two coaxial lines, and is usually used for frequent high and low speed motions.The working temperature is -20～+80℃; the nominal torque of transmission is 40～20000N.m. The LX-type elastic pin coupling has a relatively large structure, simple and reasonable, easy maintenance, symmetrical and interchangeable on both sides, long life, allowing large axial movement, and has buffering, shock absorption, and other properties.

The material of the elastic element (column pin) is generally nylon 6, which has the ability to compensate for the offset of the two axes in a small amount. The elastic part is sheared during operation and has poor working performance. It is only suitable for very low medium-speed transmission shafts.

The LX elastic pin coupling (formerly HL elastic coupling) has been listed as standard GB5014-85. It is suitable for all kinds of mechanical transmission shafts that connect two coaxial lines. It is usually used for frequent high and low speed motions.

Features of LX elastic pin coupling:

1,Elastic pin couplingIt is only suitable for medium-speed transmission shafts with very low requirements. It is not suitable for working conditions with high work requirements. Because the material of the elastic element (column) is generally selected as nylon, it has the ability to slightly compensate for the offset of the two axes. When the elastic part is working The work performance is poor due to shearing.

2. The elastic pin coupling has a simple and reasonable structure, easy maintenance, symmetrical and interchangeable on both sides, long life, allowing large axial movement, and has buffering, shock absorption, and other properties.Rod pin coupling.

3. The elastic pin coupling is a pin made of a number of non-metallic elastic materials, which is placed in the flange hole of the two halves of the coupling, and the two halves of the coupling are connected by the pin. The coupling has a simple structure , It is easy to manufacture, and it is convenient to assemble and disassemble the elastic element, without moving the two halves of the coupling.

technical parameter: