Shaanxi ZL type elastic pin gear coupling

ZL typeElastic pin gear couplingIt uses several pins made of non-metallic materials and is placed in the mating hole between the two halves of the coupling and the inner surface of the outer ring, and the two halves of the coupling are connected through the pin to transmit torque.

ZL type elastic pin gear coupling has the following characteristics:

(1) The transmission torque is large. At the same torque, the rotation diameter is mostly smaller than that of the gear coupling, and the volume is lighter. It can partially replace the gear coupling.

(2) Compared with the gear coupling, the elastic pin coupling has a simple structure, fewer components, and is more convenient to manufacture. It does not require a gear processing machine tool.

(3) Convenient maintenance and long service life. The nylon pin can be replaced by removing the baffle.

(4) The nylon pin is a self-lubricating material, which does not need lubrication, which not only saves lubricating oil, but also purifies the working environment.

(5) Poor vibration reduction and high noise.The elastic pin gear coupling has the performance of compensating the relative deviation of the two shafts. It is suitable for medium and high power transmission, and is not suitable for working parts that require vibration reduction and strict noise control.

Basic performance parameters and main dimensions of ZL elastic pin gear coupling mm

Main size D: 60mm

D1: 28mm

B: 38mm

Gap S: 2mm

许用轴孔：12、14、16、18、19、20、22、24

Shaft hole length Y: 32, 42, 52

J1: 27, 30, 38

Nominal torque Tn: 100N.m

Allowable speed n: 4000r/min

Moment of inertia I: 0.0004Kg.㎡

Weight range: 0.86Kg

Basic performance parameters and main dimensions of ZL elastic pin gear coupling mm